Evenflo Everystage dlx, Руководство пользователя

Страница: 20 / 39

For
ward-facing
NEVER use the Anti-rebound Bar in Forward-facing Mode.
WARNING
39 38
IMPORTANT: When installing this child restraint with Lower
Anchor (UAS) Connectors or the vehicle seat belt, always use
the top anchorage strap (tether), if a tether anchor is available.
IMPORTANT: Once your child exceeds any of the size
requirements for forward-facing with harness use above,
you MUST discontinue use of this child restraint with its
internal harness and begin using it in booster mode.
1
2
3
4
5
thisside
UP
th is
side UP
Forward-facing
Belt Path
Tether
Strap
Lower
Connector
(UAS)
Assembly
Child Requirements:
• Weight: 10 to 29.4 kg (22 to 65 lbs)
• Height: 71 to 124 cm (28 to 49 in.)
and tops of child’s ears are at or below
the top of the child restraint headrest.
• Age: At least 2 years old
Using the Child Restraint
Forward-facing with Harness
Moving Lower Anchor Connector
Assembly to Forward-facing Belt path
IMPORTANT: Make sure the
Lower Anchor Connector strap
does not interfere with the
internal harness straps.
Note: After moving the
Lower Anchor Connector
strap, make sure the strap
lies flat against the seat shell.
You may have to twist the
strap to achieve this.
If the Lower Anchor
Connector strap is in the
rear-facing belt path, follow
these steps:
• Raise the headrest to its
highest level (p. 58 ).
• Unfasten snaps on
headrest and back pad.
(p. 57 ).
• Pull the Lower Anchor
Connector strap to the
center of the seat.
• Route the Lower Anchor
Connector strap out
through the forward-
facing belt path.
• Re-attach the seat pad.
To access the Lower Anchor Connector Assembly, you
will first need to:
• Loosen internal harness straps (p.
62 );
• Remove Lower Anchor Connectors (p. 24 );
• Unfasten snaps on headrest and back pad. (p. 57 ).
(illustrations below show pad off for clarity only)
To install this child restraint properly in the forward-
facing position, the Lower Anchor Connector (UAS)
Assembly
MUST be in the forward-facing belt path.
Forward-facing Installation with Lower
Anchor (UAS) Connectors
1
2
3
4
5
PLACE AT ARMP
IT
Harness straps
are AT or
JUST ABOVE
the child’s
shoulders.
Lower Anchor
Connector (UAS)
Assembly
DO NOT
install by this
method for a
child weighing
more than
18kg (40lbs).