Rear-facing
The Anti-rebound Bar is for use
REAR-FACING
ONLY
.
NEVER
use the Anti-rebound Bar in Forward-facing
or Booster Modes.
WARNING
27
26
Using the Child Restraint
Rear-facing
Child Requirements:
•
Weight:
1.8 to 22.6 kg (4 to 50 lbs)
•
Height:
43 to 122 cm (17 to 48 in.) and top of child’s
head is at least 2.5 cm (1 in.) or more below the
bottom of the headrest adjust lever
When using this restraint rear-facing,
DO NOT
loosen the
vehicle seat belt to provide more leg room as this may keep
the child restraint from protecting your child.
IMPORTANT:
Once your child
exceeds
any of the size
requirements above, they
MUST
use this child restraint in
the
forward-facing
orientation, if possible. If your child
exceeds
any of the size requirements above
and
is less
than 2 years old, however, you
MUST
discontinue use of
this child restraint.
PLA
CE
AT
AR
M
PIT
1
2
3
4
5
2.5 cm (1 in.) or more
Harness straps
are
AT
or
JUST
BELOW
the
child’s shoulders.
Rear-facing
Belt Path
Lower
Anchor (UAS)
Connector
Assembly
WARNING
DO NOT install by
this method for a
child weighing more
than 18kg (40lbs).
Place Anti-rebound Bar through slots in seat cover into
metal tubing in seat shell.
Press the locking buttons and insert Anti-rebound Bar until
both ends click into place.
Note:
Pull the Anti-rebound Bar
to make sure it is locked securely.
1.
anti-rebound bar is REQUIRED for rear-facing
use in Canada.
Using the Anti-Rebound Bar -
Rear-facing Only
2.
To remove the Anti-rebound Bar, press both locking buttons
and withdraw the Bar from the seat.
1
2
3
4
5
PLAC
E
AT
ARMPIT
1
2
3
4
5
PLA
CE
AT
ARMPIT
CLICK!
Anti-rebound
Bar
Anti-rebound
Bar
