EVA eva-36-CR, Инструкция по сборке, эксплуатации и обслуживанию

Страница: 12 / 18

www.evaelektromekanik.com
10
3.8 –PASSAGES OF AUXILIARY SERVICE AND CONTROL CABLES FROM CUBICLE TO
ANOTHER
• The sockets in the LV cabinet are used for the passage of
auxiliary service and control cables from cuibcle to another.
See the left picture (5).
• Take either the female or the male socket found on the
cable passage hole in the LV cabinet and connect it to its
corresponding socket found on the cable passage hole of
the next cubicle. See the left picture (6).
NOTE: The connection between cubicle to another
is made by combining the cable entry sockets that
contain the electrical interlock and AC-DC cables
to each other.
NOTE: The cable passage hole found at the very beginning or at the end of the cubicle’s array is used
for the passage of the auxiliary service, control and command cables coming from the external power
supplies.
IMPORTANT WARNING: If there is a battery rectifier
group in the facility, ensure that is connected to a 220 /
230 VAC source.
PROTECTION AND CONTROL
CABINET
PASSAGES OF CONTROL CABLES
FROM CUBICLE TO ANOTHER
SOCKETS’
PASSAGES