EVA eva-36-CR, Инструкция по сборке, эксплуатации и обслуживанию

Страница: 11 / 18

www.evaelektromekanik.com
9
Connect the grounding busbar points of the two adjacent
cubicles with a copper conductor that is already provided with
the cubicle using bolts as shown in the right picture (3).
GROUNDING
CONNECTION
POINT
• To connect the cubicle’s array to the facility’s main
grounding system, use the grounding busbar located in the
cable connection compartment of the cubicles. See Picture
(4).
• Any of the cubicles at the beginning or at the end of the
cubicle’s array can be used for this purpose.
3.6 – EARTHING BUSBARS CONNECTION
3.7 - CONNECTING THE CUBICLES› ARRAY TO THE MAIN GROUNDING SYSTEM
OF THE FACILITY
IMPORTANT WARNING: Check thoroughly that the
grounding busbars of all the cubicles found in the
cubicle’s array are connected to each other.