Operating Instructions
α
lpha-CON1000
68X216802
9
4.2
Function Groups
The main function and sub-function groups are organised in a matrix format for configuration and
selection of parameters. The main function groups are:
1)
Temperature Coefficient settings (
tC
tC
)
2)
Temperature Measurement / compensation settings (
SSEEt
t
oo
CC
)
3)
Control relay 1 configuration (
SP1
SP1
)
4)
Control relay 2 configuration (
SP2
SP2
)
5)
Control type (
Cntr
Cntr
)
6)
Current output (
rng
rng
)
7)
Configuration (
ConF
ConF
)
8)
Calibration (
CAL
CAL dO
dO
)
The set-up parameters can be viewed or changed by entering a security code. See Section 5.2 for
security code information.
4.2.1 How to view operating parameters without access to change them:
a)
Press the ENTER key. The display will prompt the user to enter a
security code (S.Cd). Leave the security code at “000” (do not enter a
security code).
b)
Press ENTER key again. This allows you only to view (not
change) any sub-functions’ settings.
c)
Press the
∆∆
or
∇
∇
keys to scroll through the sub-functions.
d)
Press the ENTER key at a particular sub-function to view in detail.
e)
Press the ENTER key to return to the sub-function menu.
f)
Press the
∆∆
and
∇
∇
keys simultaneously (as an Escape key) at any time to return to the
Measurement mode.
Note: To simplify operations, the controller will not display parameters that are not relevant to a
particular sub-function. For example: If the user set the controller for Limit control, it will not display
pulse length/frequency settings.
000
000
S.Cd
S.Cd
tc
tc
HOLD SETUP
SEt
SEt
oo
CC
HOLD SETUP
SP
SP
11
HOLD SETUP
SP2
SP2
HOLD SETUP
ConF
ConF
HOLD SETUP
rng
rng
HOLD SETUP
Cntr
Cntr
HOLD SETUP
CAL
CAL
Con
Con
HOLD SETUP
