– 6 –
5. Operating the device
5.1 Button
Button
Interaction
Result / Behavior
Network
Press once
Temperature & Humidity Sensor Z-Wave Plus will send a Wake Up Notification to
the Z-Wave Controller.
Network
press three times within
1 second
Temperature & Humidity Sensor Z-Wave Plus will react to inclusion or exclusion
commands.
Network
hold for 10 seconds
Factory resets the Temperature & Humidity Sensor Z-Wave Plus.
5.2 LEDs
Color
State
Meaning
red
lights constantly for 5 seconds A task has failed.
green
blinking
Device is ready to be included or excluded.
green
lights constantly for 5 seconds A task was completed successfully.
2x red 3x
green
blinking pattern
Temperature & Humidity Sensor Z-Wave Plus is reset to factory
default settings.
3x red
blinking
Batterie insufficient.
LED-Anzeige
