Eurotrac T13-F, Руководство по эксплуатации

Страница: 32 / 81

Page 32/81
April 2021 W11 - W12S -W12F - W13F - T13F | Operation manual
• When uninstalling, raise the bucket to the correct height, as carefully as possible to drive the wheel loader to
the truck or storage area. Carefully control the main control lever; disassemble the bucket and reset.
Confirming that the bucket and the truck (shelf) is completely separated, the loader moves slowly back to leave
the shelf.
• Ensure that the width of the loader is not wider than that of the road.
• When reaching a parking spot, shift into neutral position, raise the parking brake and turn off the ignition
switch.
NOTE
Safe and efficient loading depends entirely on the operator. If you are an experienced driver, the following rules will
refresh your memory. If you are a student, they will help you to become a professional driver.
WARNING
Only qualified and licensed drivers are allowed to drive.
WARNING
Before starting loading, please make sure the cylinder of the quick removal device is in the locking position, set the
locking tools and cut the two-way ball valve off.
WARNING
When driving on the ramp (forward or backward), goods must be towards the uphill direction. Driving or u-turn
ramping on the horizontal should be avoided.
WARNING
When the goods are in a lifting state, do not leave the loader.
WARNING
When the goods are in a lifting state, the loader can not turn around and can not run at high speed.