Eurotrac T13-F, Руководство по эксплуатации

Страница: 53 / 81

Page 53/81
April 2021 W11 - W12S -W12F - W13F - T13F | Operation manual
Grease Addition
Add grease in every grease valve:
•
All joint bearings
• All articulated bodies
• All axle sleeves
5.2.2 Regular maintenance form
The loader should be maintained in accordance with the following schedules.
Daily Weekly or
50 hours
Monthly or
200 hours
2 months or
400 hours
Yearly or
2400 hours
Fuel level X
Engine oil level X
Tire pressure 4.5BAR X
Check tire thread. Remove stones etc. from the tire
tread.
X
Adjustment of the headlights to aim correctly X
Operation of work, tail, stop and turn lights X
Operation of the cab marker lights, the heater, the
wiper and cab light (if equipped)
X
Horn X
Hydraulic oil level X
The wheel lug nuts are tightened, 148N.M X
Drive axle fixed bolts and tighten if required X
Check torque of cylinder head bolt and all bolts and
nuts for tightness. If necessary, tighten to the
specified torque.
X
Drive axle and reduction gear box oil level X
Exhaust system for leaks and holes X
Change drive axle oil. (First change only after using
50 hours; then yearly thereafter)
X
Hydraulic oil X
Hydraulic return-suck oil filter element X
Parking Brake. With the parking brake handle in ‘lock’
position, the loader should not move on an 8 or less
percent grade, but if the loader rolls, then manual
brake is advised.
X
Dynamo belt: tighten it if needed X
Hydraulic oil X
Remove water from fuel separator (if equipped) X
Inspect engine oil cooler hoses X
Change intake air filter element X
The adjusting slides beneath the operator’s seat X
The service brake pedal pivot X
Parking brake linkage X
The throttle cable linkage X
Jogging cable X