Eurotrac T13-F, Руководство по эксплуатации

Страница: 15 / 81

Page 15/81
April 2021 W11 - W12S -W12F - W13F - T13F | Operation manual
The driver's seat is fitted with a safety belt (lap belt).
WARNING
• Always wear safety belts during work.
• Do not carry persons.
4.1.9 Multi-functional control handle
The control handle is on the right of the driver's position. As a standard, the switches on the device can control the
gears on the loader. There are three gears: forward, neutral, back and reset button. The handle can even operate a
two-way multi-channel valve, so lifting and tilting movements can be separated or merged.
For T13F model, front, rear, left, right (from driver’s direction) control handle operation correspond to lower, lift,
upper tilt and dump. It is same as other models. There are two buttons on the back of control handle. The upper or
lower key corresponds to the extension and retraction of the telescopic arm.
4.1.10 Cab
Cab door
The cab doors are to be kept locked during use. If required, the door can be
opened a crack. To do this, the lever shown in the illustration must be folded
out and locked in the door lock. On opening, the cab doors automatically
lock into the door lock. Release this lock to close the door.
Press the button Pull the lock