Eurotrac T13-F, Руководство по эксплуатации

Страница: 33 / 81

Page 33/81
April 2021 W11 - W12S -W12F - W13F - T13F | Operation manual
Multi-way valve focus controlling lifting devices and accessories
In case of multi-way valve with self-lock function, the main control lever must be pulled up to relieve the lock device
when working. When not working, the main control lever should be pressed down.
Machine optional two position six-way valve used
When W13F uses two pieces gear pump
The second gear pump provides continuous unidirectional flow. Max flow is 68L/min.
On the bracket, the quick-change connection is the high-pressure outlet P on the inside left and the return
connection T on the inside right.
When using this hydraulic oil circuit, correct attachment’s connection should be done (hydraulic motor). After
starting the engine, turn right manual three-way valve to horizontal position, motor of attachment begins to work.
Locking accessories Push the back of the small handle to the right.
Releasing accessories Push the small handle on the back of the
joystick to the left and press the quick
coupling switch on the dashboard (W13F).
Quick hitch switch
Small handle
Bucket forward Push the master control lever to the right.
Bucket backward Push the master control lever to the left.
Lifting bucket Push the master control lever to the back.
Lowering bucket Push the master control lever to the front.
Telescopic arm stretch out Press the upper back button of joystick.
Telescopic arm retraction Press the lower back button of joystick.
Bucket forward Push the master control lever to the right.
Bucket backward Push the master control lever to the left.
Accessory working Press accessory switch on the master control lever (sliver button on the joystick), at the same
time push the master control lever to the right/left.
Accessories switch
Master-control lever