Chapter 4 COMMISSIONING PROCEDURE
COMMISSIONING PROCEDURE - SAFETY
Important !
Eurotherm cannot be held responsible for any damage to persons or property or
any financial loss or costs arising from incorrect use of the product or failure to
observe the instructions contained in this manual.
It is therefore the user’s responsibility to ensure, before commissioning the unit,
that all the nominal ratings of the unit are compatible with the conditions of use
and the installation.
Danger !
A thyristor is not an isolating device.
Touching a load terminal even with a zero load current is as dangerous as
touching live mains.
Only personnel qualified and trained to work with low voltage electrical
equipment in an industrial environment should have access to the interior of the
unit.
Access to internal components of the unit is prohibited to users who are not
authorised to work in an industrial low voltage electrical environment.
The temperature of the heatsink may exceed 100°C.
Avoid all contact, even occasional, with the heatsink when the SSR is operational.
The heatsink remains hot for around 15mins after the unit has been switched off.
COMMISIONING PROCEDURE
TE200S User manual
4-2
!
Содержание TE200S
Страница 40: ......
