Eurotherm TE200S, Руководство пользователя

Страница: 20 / 42

TE200S User manual 2-6
Bulkhead mounting
Two fixing plates, supplied with the SSR (code BKD), are used for bulkhead mounting.
For this type of mounting, use the following instructions:
• Drill three holes for M6 screws following the dimensions given in Figure 2-4
• Fix the upper plate on to the panel using the oblong hole at the top of the unit
• Install the lower plate with two M6 screws
• Insert the fixing lugs of the controller into the lower plate
• Slightly undo the central screw holding the upper fixing plate in order to slide it upwards,
position the controller on the lower fixing plate and slide the upper plate back down on to
the slots on the heatsink.
Figure 2-4 Bulkhead drilling and mounting dimensions (in mm) for the
TE200S unit
INSTALLATION
9 8
EUROTHERM TE200S
R
(L1)
S
(L2)
T
(L3)
U
(T1)
V
(T2)
W
(T3)
40A/400V
Fixing plates
Upper oblong hole
105
±
0.5
Lower fixing plate
holes
200 +0
-1
Not used
Not used