Eurotherm Drives 590 DRV Digital, Руководство по эксплуатации продукта

Страница: 150 / 318

Appendix D I/O Configuration - System Menu
590 DRV Digital DC Drive Product Manual App. D - 1
D
Appendix D I/O CONFIGURATION - SYSTEM MENU
INTRODUCTION
To customize performance and get optimum use out of the 590 DRV Digital drive, you may need to configure, or
reroute software connections to and from the drive's inputs and outputs and to and from the drive's software blocks.
You can configure the drive and change software block parameter values either through the MMI or with a personal
computer (PC) running the software package ConfigEd Lite (see the ConfigEd Lite Software Manual RG352747).
This chapter describes how to scale and configure drive input and output signals through the MMI under the
SYSTEM::CONFIGURE I/O sub-menus ANALOG INPUTS, ANALOG OUTPUTS, DIGITAL INPUTS and DIGI-
TAL OUTPUTS. Serial communication through the drive's P3 communications port can be re-configured through the
CONFIGURE 5703 sub-menu. The sub-menus BLOCK DIAGRAM, and INTERNAL LINKS allow advanced
configuration between parameters within the drive software blocks and I/O.
NOTE. For a desciption of each of the drive's software blocks accessible under the SETUP
PARAMETERS menu, refer to Appendix C. Parmeters under the SPECIAL BLOCKS sub-menu are
discussed in Appendix M.
The chapter is arranged in the order the sub-menus (or function blocks) appear in the MMI under
SYSTEM::CONFIGURE I/O. Each section describes the function block's parameters and contains a schematic block
diagram of the function block. It also includes a table which lists the block's parameters, gives each parameter's signal
range and default value and provides a brief description of each parameter. The configuration tag number associated
with each drive parameter also appears in the table. In addition, each section includes a drawing illustrating how to
access the parameter function block through the MMI. Configuration examples follow each schematic block diagram.
NOTE. The inside front cover contains a full drawing showing how all the drive's function blocks
process input, output and control signals and how each block interfaces with the drive's overall control.
A more detailed software block diagram appears in the fold-out drawing at the end of this appendix
(Figure D.20).
MMI Access to CONFIGURE I/O
Figure D.1 shows how to access the CONFIGURE I/O::ANALOG INPUTS sub-menu
through the MMI. Upon power-up, the MMI briefly displays the software version and
then changes to the message shown at the top of the figure. Pressing the "M" key
changes the display to read the next block in the menu tree, DIAGNOSTICS. The
▲
key scrolls display up from DIAGNOSTICS to SYSTEM. Pressing "M" at SYSTEM
puts the user in SOFTWARE, the first sub-menu of the SYSTEM menu. Press
▼
to
scroll down to CONFIGURE I/O and "M" again to enter that sub-menu. Scroll down
to ANALOG INPUTS by pressing
▼
and press "M" for configuration access to the
drive's analog I/O. Press
▲
or
▼
to scroll through the analog I/O parameters. Hit "E"
to return to the main CONFIGURE I/O menu level, then use the
▲
and
▼
keys to
scroll to the other sub-menus within CONFIGURE I/O.
Parameter types
Each drive parameter is associated with a unique address, or "tag." When "connecting"
any parameter to drive inputs, outputs, or links, this tag is designated as the source or
destination address. Appendix I list all the drive's parameters by tag number.
Appendix J presents the same table in menu order and Appendix K sorts the
parameters alphabetically.
590SP DC DRIVE
MENU LEVEL
MENU LEVEL
DIAGNOSTICS
MENU LEVEL
SYSTEM
SYSTEM
SYSTEM
CONFIGURE I/O
CONFIGURE I/O
SOFTWARE
CONFIGURE I/O
CONFIGURE ENABLE
ANALOG INPUTS
M
M
M
Figure D.1 - Sample MMI
Path