Eurotherm Drives 590 DRV Digital, Руководство по эксплуатации продукта

Страница: 105 / 318

B
Appendix B Using the Man Machine Interface
App. B - 2
590 DRV Digital DC Drive Product Manual
MMI Menu Structure
The menu tree structure of the MMI display has been designed to allow non-expert users to read and set parameters
controlling the drive with a minimum of work and potential for confusion.
The core of the system is MENU LEVEL which contains the eight functional areas of the controller. The following
list describes the functions performed in each MENU LEVEL category and refers to the section within the manual that
discusses the menu in depth.
Menu Level Description
Diagnostics Contains the parameters for monitoring the status of the controller. (See Chapter 5, Troubleshoot-
ing.)
Set Up Parameters Parameters for calibrating and tuning the controller to the application. (Refer to Appendix C, Setup
Parameters.)
Password Allows the user to set up password protection for the drive configuration. (See Chapter 4, Start-up
and Adjustment.)
Alarm Status Contains parameters for monitoring the fault status of the controller. (Refer to Chapter 5, Trouble-
shooting.)
Menus Settings for changing the MMI user interface. (Refer to this appendix. See below.)
Parameter Save Menus for saving the current configuration and settings to EEPROM. (See Chapter 4, Start-up and
Adjustment.)
Serial Links Configures the RS232 and RS422 serial ports. (See Appendix H, Serial Communications.)
System Contains the parameters for configuring the input and output terminals and internal connections. (See
Appendix D, I/O Configuration.) This sub-menu also displays the firmware issue level and contains menus
reserved for advanced drive troubleshooting. These advanced menus are available only in a restricted
password mode. Only qualified Eurotherm Drives service personnel have access to these menus.
SYSTEM also contains the miniLINK setup menu. Newer issue 590 Digital drive firmware has
superceded most miniLINK functions. Refer to the appropriate miniLINK manual for miniLINK docu-
mentation.
Figure B.1 shows the complete MMI menu structure. When using the figure, the M key moves to the right, E moves to the
left, and
▲
and
▼
move up and down the menu lists. The complete menu structure for the MMI is often not needed for
most applications. To simplify your work with the MMI, you can use a reduced menu mode by setting MENUS::FULL
MENUS to DISABLED. The reduced list of menus is identified in Figure B.1 by the "
· · · · ·
" in the right side of the menu box.
MENU LEVEL is entered by pressing the M key from the default start up display. Pressing the
▲
key takes the user
up through the categories in MENU LEVEL. To investigate the sub-menus, press the M key again.
Once at the appropriate sub-menu item, use the M key again to choose the parameter or option sub-menu, then use the
▲
and
▼
keys once again to modify the value or option. When finished, use the E key to back out of the menu
structure, first to the sub-menu, then the main menus, until you reach the starting screen.
For example, from the default start up menu, press M to enter MENU LEVEL; press the
▼
key once to advance to the
SETUP PARAMETERS menu item. Press the M key again to enter the SETUP PARAMETERS sub-menu. Use the
▲
or
▼
key to scroll through RAMPS, AUX I/O, etc.
Default Settings
The 590 DRV Digital drive is shipped with MMI settings that represent a common set of parameters for general use.
These settings are listed in Appendix C. Use caution when modifying these settings to ensure the new settings are the
most appropriate for your situation.
If you unintentionally change menu settings and cannot remember how to reset individual parameters, return all
parameters to default by performing a four-button reset. To do so, hold down all four MMI buttons (M, E,
▲
,
▼
)
while reapplying power to the drive. This restores the drive's default settings.
NOTE. These default settings do not match the "as-shipped" settings if Eurotherm Drives has modified
the drive configuration at your request for your specific application.