Eurotech Bitsy G5, Руководство пользователя

Страница: 11 / 23

Hardware Reference
110121-4001A 11
3.3 Signal Connectors
The following tables describe the electrical signals available on the connectors of the Bitsy G5.
Each section provides relevant details about the connector including part numbers, mating
connectors, signal descriptions, and references to related chapters.
Legend:
n/c Not connected
GND Bitsy G5 ground plane
(4.1) Reference section(s) for signals
Signal Types:
I signal is an input to the system
O signal is an output from the system
IO signal may be input or output
P power and ground
A analog signal
OC open collector output
The reference designators on the Bitsy G5 are labeled differently than the previous four
generations of Bitsy family products or mating personality boards. The reference designators for
the Bitsy family products are given in the following sections with the Bitsy G5 reference
designators shown as (Jx).
3.3.1 J1 (J8): LCD Panel Interface Connector
Board Connector: 2x17 shrouded header, 2 mm, Samtec STMM-117-02-G-D
Recommended Board-to-Cable Connector: TCSD series
Recommended Board-to-Board Connector: ESQT series (e.g. ESQT-117-02-F-D-500)
The following table describes the signals on the LCD panel interface connector. Signal names
shown are for TFT active matrix color LCDs at 18 bpp (bit-per-pixel). Signals from the i.MX31
are buffered and RFI filtered before reaching J1 (J8). The LCD panel output buffers operate at a
fixed 3.3 V.
Pin
i.MX31
Signal Name
Color Active TFT Display at 18bpp
Eurotech Signal
Name
Description
1 n/c
2 GND ground
3 FPSHIFT PNL_PIXCLK Pixel Clock
4 HSYNC PNL_HSYNC Horizontal Sync
5 VSYNC3 PNL_VSYNC Vertical Sync
6 GND ground
7 LD12 PNL_RED0 Red Bit 0
8 LD13 PNL_RED1 Red Bit 1
9 LD14 PNL_RED2 Red Bit 2
10 LD15 PNL_RED3 Red Bit 3
11 LD16 PNL_RED4 Red Bit 4
12 LD17 PNL_RED5 Red Bit 5
13 GND ground
14 LD6 PNL_GREEN0 Green Bit 0
15 LD7 PNL_GREEN1 Green Bit 1
16 LD8 PNL_GREEN2 Green Bit 2
17 LD9 PNL_GREEN3 Green Bit 3
18 LD10 PNL_GREEN4 Green Bit 4