Eurotech Bitsy G5, Руководство пользователя

Страница: 12 / 23

Bitsy G5 User Manual
12 110121-4001A
Pin
i.MX31
Signal Name
Color Active TFT Display at 18bpp
Eurotech Signal
Name
Description
19 LD11 PNL_GREEN5 Green Bit 5
20 GND ground
21 LD0 PNL_BLUE0 Blue Bit 0
22 LD1 PNL_BLUE1 Blue Bit 1
23 LD2 PNL_BLUE2 Blue Bit 2
24 LD3 PNL_BLUE3 Blue Bit 3
25 LD4 PNL_BLUE4 Blue Bit 4
26 LD5 PNL_BLUE5 Blue Bit 5
27 GND ground
28 DRDY0 PNL_LBIAS Data Enable
29
PNL_PWR Vcc (5 V) or 3.3 V (3.2.1)
30
31
PNL_RL
Horizontal mode select
(set by R247 or R246)
4
32 PNL_UD
Vertical mode select
(set by R248 or R249)
4
33 reserved
34
ADSmartIO
(PD4)
VCON
low-voltage adjust for contrast
control of some displays
3.3.2 J2 (J3): PCMCIA
Integrated Ejector: FCI 95620-050CA
The 68-pin PCMCIA socket conforms to the PCMCIA standard for 5V-tolerant Type II cards, and
can also be run at 3.3 V. Normally, the socket is de-energized. The operating system is
responsible for turning on the socket when a card is inserted and turning it off when the card is
removed. Ejector hardware is standard. Vpp (pins 18 and 52), which is 12 V in older PCMCIA
implementations, is left unconnected in this implementation.
3.3.3 J3 (J9): Power, I/O, Serial 2 & 3, USB, Touch Screen and others
Board Connector: 2x25 shrouded header, 2 mm, Samtec STMM-125-02-G-D
Recommended Board-to-Cable Connector: TCSD series
Recommended Board-to-Board Connector: ESQT series (e.g. ESQT-125-02-F-D-500)
Pin Name Pin Type Description
1 EIO9 IO
General-purpose Digital I/Os EIO8 2 IO
3 EIO7 IO
GND
4
P ground
6
VCC
8
PO 5 V
10
5
reserved
7
reserved
9 /IRDAON O External IRDA control
4
The LCD panel scan direction is selected by changing the voltage on the PNL_RL and PNL_UD
signals. These signals are pulled up on standard Bitsy G5 boards.