background image

201706-229-ENG 

User manual - HYDROPRO 600

P19

9. WARRANTY (continued) 

9.2. CERTIFICATE OF WARRANTY

IT IS COMPULSARY TO RETURN THIS DOCUMENT DULY COMPLETED

BY E-MAIL : 

[email protected]

 OR BY FAX : 

+33(0)4 42 53 44 36

IMPERATIVE

The manual must be provided to the user of the equipment.

It must be read before starting up the machine.

For any intervention under warranty, the purchase invoice must be presented.

                           

WARRANTY

Each product is delivered inspected and tested.

Moreover, it is guaranteed for 12 months from the date of purchase.

This guarantee only applies if the buyer respects the safety regulations, contractual and administrative 

standards and if the use was in conformity with the instructions present in the user manual.

Based on this warranty, the manufacturer will repair or replace free of charge any part that can deteriorate 

itself or be defective during this period.

The "final judgment" rests solely with our After-Sale Service technicians.

The guarantee does not cover parts which, because of their specific use, are subject to wear and tear.

If the identified defects could not be attributed to our liability, costs will be charged to the buyer.

MODEL :

 HYDROPRO 600 airless atomizer

SERIAL NUMBER :

                

DELIVERY NUMBER :

Rousset, dated

    Signature of the dealer   

Signature of the final user   

Stamp of the final user

Distributed by : EUROMAIR DISTRIBUTION

Z .I. Rousset Parc Club, 343 boulevard Francis Perrin - 13106 Rousset sur Arc Cedex

Tél : 00 33 (0)4 42 29 08 96 – Fax : 00 33 (0)4 42 53 44 36

SAS au capital de 40 000€ - SIREN 444 797 310 000 – NAF 4673 B

Содержание 30893





















Отзывы: