EUROPRO 30893, Руководство пользователя

Страница: 15 / 20

201706-229-ENG User manual - HYDROPRO 600 P15
7. FAILURES AND REMEDIES
Failure Remedy
I turn the switch and the machine does not
start.
• Verify the electrical supply.
I try to atomize but the pump does not run.
If electrical motor:
• Verify the electrical supply
•
Verify that the switch (H) is onto the ON position.
• Let the machine cool down for a few minutes and
try again.
If thermal motor:
• Verify the oil level of the motor and the fuel level.
• Contact the After-Sale Service.
I press the trigger of the spray-gun and the
product does not flow out.
• Verify that the nozzle is not clogged.
The pump does not stop when I do not paint.
• Verify that the pump valve is not stuck.
• Contact the After-Sale Service.
In case of an unknown defect or a doubt on the good running of the machine, do not try to
repair it by yourself or to dismantle it.
Contact an authorized After-Sale Service or our hotline : +33(0) 4 42 29 08 96 .