Europlex SigNET200 Series, Руководство пользователя

Страница: 12 / 18

SigNET 200/300 User Guide
12 ELAB 1543
4.8 Changing a User Code
If users have the right to change their user code, this can be done through the
Keypad.
Note, if the system is set for 5-digit user codes, a new 5-digit code must be entered.
The system will not accept a code with fewer numbers than it is set to receive.
To change a user code:
1. Scroll to CHANGE CODE and press SELECT (right soft key).
A randomly generated user code appears.
2. Select new code, if acceptable. Or overwrite by entering the new user code and
press ENTER (right soft key).
3. Confirm the new code, press SAVE (right soft key).
4. Press BACK (left soft key) to return to the previous screen to amend the code.
During the process if the display times out, the old code remains valid.
4.9 Using SMS
SigNET systems with modems and appropriate configuration, allow SMS
messaging. To use SMS, each user must have the appropriate user profile
rights. Notification of the following events can be sent to users as SMS
messages:
• Alarm
Activation
• Confirmed Alarms
• Fault and Tamper
• Arming and Disarming (Mode Change)
• Inhibit and Isolate
• All other types of events
4.9.1 SMS Events
To receive Event notifications, SMS setup must have the phone number; the
number must be enabled for SMS; and the Events must be toggled for SMS
Event notification.
Add the phone number for SMS use:
1. Scroll to the SMS EVENTS option and press SELECT. The following
configuration options are available:
2. Add by providing phone number for receipt of event notification
(Requires three-digit country code prefix)
Edit phone number as needed. (Within this level is also enabling SMS
and selecting Reported Events.) Delete: Remove phone number as
needed
3. Press BACK to exit the SMS EVENTS menu.
Each user may set a maximum of five phone numbers for SMS receipt.
Note
Where User Duress feature is enabled, consecutive user codes (i.e. 2906, 2907) are not
permitted, as entering this code from the Keypad would activate a user duress event.
…CHANGE CODE…
EXIT
SELECT
CODE 4740
BACK SELECT
…SMS EVENTS…
EXIT
SELECT
…ADD…
EXIT
SELECT
SMS NUMBER
353
BACK ENTER
UPDATED
UPDATED