SigNET 200/300 User Guide
10
ELAB 1543
4. User Menu Options
The following functions are available to users under MENUS on the Keypad.
In navigation mode following input of user code, the user selects one of a number of pre-defined programming
options from a list. Pressing the up/down arrow keys scrolls the list of options available for selection. An ellipsis (…)
on accompanying graphics denotes when there is a choice of menu selection by
scrolling.
4.1 Inhibiting
a
Zone
Zones on the system can be manually inhibited from the Keypad. Inhibiting a
zone removes that zone from the system, silently disregarded, for one alarm set
period only.
1. Press SELECT the INHIBIT option on the Keypad.
2. Scroll to the ZONES option and press SELECT (right soft key).
3. Scroll and select the required zone and toggle the setting from NOT
INHIBITED to INHIBITED using the up/down arrow keys.
4. Press SELECT (right soft key) to exit user programming.
4.2
Isolating a Zone or Fault
Zones or faults on the system can be manually isolated from the Keypad.
Isolation allows a zone to be removed from the system, silently disregarded, until
it is set for de-isolation by the user.
To isolate a zone:
1. Scroll to the ISOLATE option and press SELECT (right soft key).
2. Scroll to the ZONES option and press SELECT (right soft key).
3. A list of zones on the system displays. Select the required zone and
toggle the setting from NOT ISOLATED to ISOLATED using the up/down
arrow keys.
4. Press SELECT (right soft key) to exit User Programming.
4.3 Set
Date/Time
The date and time can be manually entered on the system. The time and date
information displays on the Keypad to be used with time-related programming
features.
To program the Date and Time:
1. Scroll to the SET DATE/TIME option and press SELECT (right soft key). The
date displays on the top line.
2. To enter a new date, press the required numeric keys. To move the cursor to
the left and right, press the left and right arrow keys. Press ENTER (right soft
key) to save the new date.
3. To enter a new time, press the required numeric keys. To move the cursor to
the left and right, press the left and right arrow keys. Press ENTER (right soft
key) to save the new time.
Note
Only the Alarm, Exit/Entry, Fire Exit and Line Zone types can be inhibited on the SigNET system.
All other zone types are not displayed in the inhibit menus.
…INHIBIT…
EXIT
SELECT
…ZONES…
BACK SELECT
…INHIBIITED…
BACK SELECT
…ZONE1…
BACK SELECT
…ISOLATE…
EXIT
SELECT
…ZONES…
BACK SELECT
…ISOLATED…
BACK SELECT
…ZONE1…
BACK SELECT
…SET DATE/TIME…
EXIT
SELECT
DATE
18/04/2008
BACK ENTER
UPDATED
