background image

SigNET 200/300 User Guide  

E-LAB-1543  

 

11 

6.  When WALK TEST is selected, users can test the operation of each alarm device by activating the device 

and checking to hear if an audible beep sounds at the Keypad.  

4.7 

Viewing the Event Log 

The most recent events on the system can be viewed by selecting the EVENT 
LOG option. The most recent events are displayed on the bottom line of the 
display and all previous events are displayed for 1 second in turn.  

To view the event log on the Keypad: 
1.  Enter a valid user code. 
2.  Using the up/down arrow keys, scroll down to the MENUS option and 

press SELECT (right soft key). 

3.  Scroll down to the EVENT LOG option and press SELECT (right soft 

key).  

4.  The Keypad displays the most recent event logged on the system on 

the bottom line, and all previous events are displayed for 1 second in 
turn. 

5.  To view an event from a particular date, enter the date with the numeric 

keys. 

4.8 

Enabling the Chime Function 

The chime function can be enabled or disabled on all zones where the chime 
has been programmed as an audible alert feature.  

To enable or disable the chime function:  
1.  Enter a valid user code.  
2.  Using the up/down arrow keys, scroll down to the MENUS option and 

press SELECT (right soft key). 

3.  Scroll to the CHIME option and press SELECT (right soft key). 
4.  Choose to enable or disable the chime function by toggling between the 

two options.  

 

4.9 Using 

SMS 

For instructions on using the SMS feature, visit the Downloads section of Europlex’s web site at 

www.europlex-

signet.com/downloads

 and download the SMS User Guide. 

 
 

 

EVENT LOG 

EXIT               SELECT 

 

01 SEP 06 17:00 

INHIBIT: ZONE 3 

 

 

MENUS 

EXIT              SELECT 

 

MENUS 

EXIT              SELECT 

 

CHIME 

EXIT              SELECT 

 

ENABLED 

EXIT              SELECT 

Содержание SigNET 200
















Отзывы: