EURONOM Exotic Compact 10, Инструкция по установке и эксплуатации

Страница: 52 / 74

52
Current transformers 10-13 (accessories)
The connection is named "CURRENT SENSORS" on the adhesive sticker.
Current transformers are not included as standard. The job of the current transformers is to
continuously measure the current on the incoming phases in the house/system. This measuring helps
the program ensure that the power never exceeds the rating for the main fuse by releasing any
power ‐ stage in the electric heater.
The current transformers are phase selective, i.e. they measure each phase separately. This allows
the system to decide itself which phase to load. This also ensures that the 3 phases are distributed as
evenly as possible.
Installing the current transformers is recommended but not required. It is possible to limit the
maximum electrical power for the electric heater in the display.
The current transformers should be installed on the incoming feed to the central control unit, which
must be protected against overloads. This should only be performed by an authorised electrician.
The minimum cable area for the connection is 0.5 mm². At least 4 ‐ lines must be used.
Mount the transformers by threading the incoming phases through the transformer. The blue cables
from the transformers should be joined together and connected to the common terminal block 13
Current transformers item no. 4663003
Current transformers
Main fuses
Terminal block Exotic Compact