16
Never use the device without the protective cover or with a badly fitting cover or a
damaged, broken or worn cover.
Do not use the device if the electric cable or extension cable is damaged or worn.
Check before use!
If you damage the electric or extension cable during use of the device, remove the
plug from the socket immediately. Do not touch the cable until the power supply has
been disconnected!
Do not use the weed brush near children or animals.
Only use the weed brush in daylight or in well-lit conditions.
Check to ensure that the weed brush has been assembled according to instructions.
If you assemble the weed brush, use the keys supplied to prevent damage to the
device.
Wear protective gloves when assembling the brush.
Once you have assembled the device, leave it to tick-over in a safe environment for a
while. If the device vibrates, if you notice damage to the brush or establish other
defects, turn it off immediately and try to find and resolve the problem.
Do not use any worn brushes.
Do not use the device for removing wet weeds.
Before you start work with the device, remove stones, sticks, wires and other objects
from the area you will be clearing.
Only use the device in a vertical position, with the brush directed towards the ground.
Never switch the device on while it is in another position!
Do not rush when using the device.
Do not exert any pressure on the device.
Always keep your hands and feet away from the brush.
Avoid touching the brush.
Ensure that the electric cable does not touch the brush.
Do not allow the brush to rotate more quickly than is set as standard.
Before you set the device aside, always switch it off and wait until the brush has
stopped turning. Never try to stop the brush turning manually!
Take care!
Be aware that the brush will continue to rotate even after you have turned
it off!
Take care!
Only use the brushes recommended by the manufacturer.
Only use original parts and accessories as supplied by the manufacturer.
Rust or other signs of chemical or mechanical changes on the materials used within
the device can lead to problems.
The device and brush must be stored so that they are protected against the influences
of water/moisture, heat, excessively low temperatures that could lead to the formation
of condensation, and acidic or other aggressive vapour/substances. Make sure that
the brushes cannot rotate or bend during storage.
Always remove the plug from the socket once you have finished with the device, when
you wish to carry out maintenance or if the device is not being used. Check the device
for damage after every use.
After use, store the device in a safe place, outside the reach of children.
