32
Horizontal placement
1.
Place the bracket against the wall, with the
bracket openings at the left and mark the
eight holes (Figure 10).
2.
Drill eight 10 mm holes at the marked spots.
3.
Place the anchor bolts (Figure 10, pos. 3).
4.
Tighten the wall bracket (Figure 10, pos. 1) to
the wall with the eight nuts (Figure 10, pos.
2).
Figure 10
Figure 11
5.
Place the device brackets (Figure 11, pos. 3) over the wall bracket (Figure 11, pos. 1).
6.
Slide the device (Figure 11, pos. 2) into the openings of the wall bracket (Figure 11, pos.
1).
7.
To remove the device, lift and slide it in the opposite direction.
