35
1.
Make sure the device is correctly mounted.
2.
Make sure the ON/OFF switch is in the OFF
position (Figure 16, pos. 2).
3.
Place the power plug (Figure 16, pos. 1) into
an earthed wall socket that is easily
accessible. Use an earthed wall socket with a
minimum power of 1000 Watt.
4.
Make sure the power cable does not come
into contact with the device.
Figure 16
Remote control
1.
Remove the cover (Figure 17, pos. 1).
2.
Remove the batteries (if present).
3.
Insert two batteries (AAA 1.5 V) (Figure 17,
pos. 2) as indicated in the battery
compartment. Make sure to insert the
batteries correctly.
4.
Replace the cover.
Figure 17
Operation
WARNING
Before every use, make sure that:
•
you operate the device with dry hands;
•
the device is clean and dry;
•
the device is not damaged;
•
the device is not covered or blocked;
•
the device is securely mounted to the wall or ceiling.
CAUTION
When the device is turned on or off, it may emit a sound. This is the material
expanding and shrinking during heating and cooling down.
