31
Vertical placement
1.
Place the bracket against the wall, with the
bracket openings at the top and mark the
eight holes (Figure 8).
2.
Drill eight 10 mm holes at the marked spots.
3.
Place the anchor bolts (Figure 8, pos. 3).
4.
Tighten the wall bracket (Figure 8, pos. 1) to
the wall with the eight nuts (Figure 8, pos. 2).
Figure 8
Figure 9
5.
Place the device brackets (Figure 9, pos. 3) over the wall bracket (Figure 9, pos. 1).
6.
Slide the device (Figure 9, pos. 2) into the openings of the wall bracket (Figure 9, pos. 1).
7.
To remove the device, lift and slide it in the opposite direction.
