34
8.
Place the device brackets (Figure 14, pos. 3) over the ceiling bracket (Figure 14, pos. 1).
9.
Slide the device (Figure 14, pos. 2) into the openings of the ceiling bracket (Figure 14,
pos. 1).
10.
To remove the device, lift and slide it in the opposite direction.
Temperature sensor (Optional)
CAUTION
For accurate temperature measuring use the external temperature sensor.
1.
Make sure the ON/OFF switch is in the OFF
position (Figure 15, pos. 2)
2.
Connect the temperature sensor connector
(Figure 15, pos. 1) to the sensor plug.
3.
Place the temperature sensor approximately
2 meters away from the device.
Figure 15
Installation
WARNING
Do not put the power plug into the wall socket before the device is correctly
mounted.
Do not use an extension cable; this can cause overheating and fire. If using an
extension cable is unavoidable, make sure it is undamaged and earthed. Use
an extension cable with a minimum power of 1000 Watt. Always unwind the
extension cable completely to prevent overheating.
CAUTION
Make sure that the main voltage is the same as indicated on the identification
label of the device. All electrical connections must stay dry under all
circumstances.
