30
Assembly
The device is packed in one box. Remove all packaging material and check that the device is
not damaged. Do not use the device if it is damaged, but always contact your supplier. Keep
the packaging for safe storage and transport.
Mounting
WARNING
The wall or ceiling used for mounting must be made from non-flammable
material and should be able to withstand a minimum temperature of 125 °C.
CAUTION
Make sure to use suitable fastening materials, depending on the surface. The
provided anchor bolts are suitable for a brick wall. Never block the space
between the device and the wall or ceiling.
This device can be mounted in 3 ways:
•
vertical to the wall;
•
horizontal to the wall;
•
to the ceiling.
In all 3 of the placements, the control panel should be visible and operable.
Wall mounting
1.
Place the device on a non-flammable and
solid wall.
2.
Place the device with a minimum distance
(Figure 7) of:
•
30 cm from the side walls;
•
30 cm from the ceiling;
•
20 cm from the floor;
•
50 cm clearance on the front side.
3.
Do not mount the device immediately over,
near or below a socket outlet.
Figure 7
