EN
117
5.2 Maintenance
WARNING:
The maintenance of
this appliance should be carried
out by an authorised service person or
quali
fi
ed technician only.
Changing the Oven Lamp
WARNING:
Switch o
ff
the
appliance and allow it to cool.
• Remove the glass lamp cover, then
unscrew the bulb and remove it.
• Insert the new bulb (resistant to 300 °C)
to replace the bulb that you removed
(230 V, 15-25 Watt, Type E14).
• Replace the glass lamp cover, and
your oven is ready for use.
• The product contains a light source of
energy e
ffi
ciency class G.
• Light source can not be replaced by
end user. After sales service is needed.
• The included light source is not in-
tended for use in other applications.
The lamp is designed speci
fi
cally
for use in household cooking app-
liances. It is not suitable for household
room illumination.
6. TROUBLE-
SHOOTING&TRANS PORT
6.1 Troubleshooting
If you still have a problem with your ap-
pliance after checking these basic trou-
bleshooting steps, please contact an
authorised service person or quali
fi
ed
technician.
Replaceable light source by a
professional
Problem
Possible Cause
Solution
Oven does not switch
on.
Power is switched o
ff
.
Check whether there is power supplied. Also check
that other kitchen appliances are working.
No heat or oven does
not warm up.
Oven temperature control is incor-
rectly set. Oven door has been left
open.
Check that the oven temperature control knob is
set correctly.
Oven light (if
available) does not
operate.
Lamp has failed. Electrical supply is
disconnected or switched o
ff
.
Replace lamp according to the instructions. Make
sure the electrical supply is switched on at the wall
socket outlet.
Cooking is uneven
within the oven.
Oven shelves are incorrectly posi-
tioned.
Check that the recommended temperatures and
shelf positions are being used. Do not frequently
open the door unless you are cooking things that
need to be turned. If you open the door often, the
interior temperature will be lower and this may
a
ff
ect the results of your cooking.
The timer buttons
cannot be pressed
properly.
There is foreign matter caught
between the timer buttons. Touch
model: there is moisture on the
control panel. The key lock function
is set.
Remove the foreign matter and try again. Remove
the moisture and try again. Check whether the key
lock function is set.
The oven fan (if avail-
able) is noisy.
Oven shelves are vibrating.
Check that the oven is level. Check that the
shelves and any bake ware are not vibrating or in
contact with the oven back panel.