![EuroLite ZEITGEIST PMC-16 MOVE Скачать руководство пользователя страница 40](http://html1.mh-extra.com/html/eurolite/zeitgeist-pmc-16-move/zeitgeist-pmc-16-move_user-manual_2438402040.webp)
00092402.DOC, Version 1.1
40/55
Control Board
The Control Board offers several features: you can simply set the starting address, run the pre-programmed
program or make a reset.
The main menu is accessed by pressing Mode until the display is lit. Browse through the menu by pressing
the arrow buttons (up, down, left, right). Press Enter in order to select the desired menu. You can change the
selection by pressing the arrow buttons. Press Enter in order to confirm. You can leave every mode by
pressing Mode. The functions provided are described in the following sections.
The fixture contains a battery-buffered Control Board that stores all settings and also allows the menu to be
accessed when the fixture is not connected to power. To access the display menu via the internal battery,
press and hold the ESDC button for two seconds, this will activate the menu. The display will automatically
switch off about one minute after the last pressing of the buttons.
Default settings shaded.
Main menu
Sub menu
Display
Function
Receive
Set address
A001~ XXX
DMX address setting
User
Mode
User mode
Standard
Basic
Extend
User A
User B
User C
DMX channel mode/
user-defined channel
mode
Edit A
Edit B
Edit C
PAN ...
Edit user-defined
channel mode
Function
DMX
No DMX status
Close/Hold/
Auto/Music
Run if no DMX
P. Reverse
ON/OFF
Reverse movement
T. Reverse
ON/OFF
PAN degree
630/540
Select PAN-angle
630° or 540°
Feedback
ON/OFF
Automatic PAN/TILT
correction; target
position
Move. spd
Speed 1 ~ 4
Adjust PAN/TILT
speed
Mic. sens
0~99%
Mic sensitivity
Dormancy
OFF/1-99M 15M
Standby mode
Fixture ID
Service PIN
Password=XXX
Passwort „050“
RDM PID
XXXXXX RDM
PID
Code
Device IP Addr
XXX.XXX.XXX.XXX
IP address setting
device
Ctrl IP Addr
XXX.XXX.XXX.XXX
IP address setting
console
Universe XXX Select
universe
Protocol Set
ArtNet
Software for
controlling the device
Net Switch
ON/OFF
Activate the device to
receive the ArtNet
signal
Fan Set
Head Fan
Auto
Adjust fan speed
head
High
Low
Base Fan
50%
Adjust fan speed
base
75%