00092402.DOC, Version 1.1
38/55
Operation via Art-Net
For use via appropriate lighting control software supporting Art-Net. The device can be configured through its
control panel.
Only use UTP cables type CAT5e or better.
Data Connection
The
Zeitgeist PMC-16 MOVE
uses a RJ45 data connection for connection to a computer or a previous or
subsequent device.
To link all data ports the wiring can be made according to the following two installation methods.
Interconnect the devices with
network cables. The Ethernet
ports can be used as inputs
and outputs as desired.
Connect the first device in the
chain to the computer’s network
card (optionally through a
network switch) with a network
cable.
If needed, cables up to 100
meters long may be used
(point-to-point connection
provided). Different lengths are
available as accessory.
Please refer to the instructions
under Control Board.
