00112264.DOCX, Version 1.1
24/28
DMX operation
Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 14 control channels.
However, it can also be switched to a mode with 2 channels if different functions are required. To be able to
operate the device with a DMX controller, the DMX starting address must be set for the first DMX channel.
The starting address depends upon which DMX controller is being used. Please refer to the controller’s
documentation.
1 Press the
MENU
button so many times until
Addr
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to set the address. Confirm with the
ENTER
button.
2 Press the
MENU
button so many times until the display indicates the DMX channel mode
ChMd
. Confirm
with the
ENTER
button. Use the buttons
UP
and
DOWN
to select the desired number of DMX channels.
Confirm with the
ENTER
button.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
DMX functions in 2-channel mode
Channel
Value
Function
1
000 – 009
No function
010 – 044
Show program 1: Derby
045 – 079
Show program 2: Strobe
080 – 114
Show program 3: Laser
115 – 149
Show program 4: Derby + Laser
150 – 184
Show program 5: Derby + Strobe
185 – 219
Show program 6: Laser + Strobe
220 – 255
Show program 7: Derby + Laser
2
000 – 247
Program running speed slow > fast
248 – 255
Sound control
DMX functions in 14-channel mode
Channel
Value
Function
Master control
1
000 – 009
No function
010 – 044
Show program 1: Derby
045 – 079
Show program 2: Strobe
080 – 114
Show program 3: Laser
115 – 149
Show program 4: Derby + Laser
150 – 184
Show program 5: Derby + Strobe
185 – 219
Show program 6: Laser + Strobe
220 – 255
Show program 7: Derby + Laser
RGBW color mix:
if channel 1 is set to a value between 000-009
2
000 – 009
Blackout
010 – 198
Color selection (15) for the LEDs; each color takes up 15
DMX values
199 – 225
4-color running light slow > fast
226 – 255
15-color running light slow > fast
Show programs:
if channel 1 is set to a value between 010-255
2
000 – 247
Automatic show programs 1-7
Running speed slow > fast
248 – 255
Sound-controlled show programs 1-7
