00112264.DOCX, Version 1.1
22/28
OPERATION
Switch on the device. The display indicates the last operating mode. The operating modes can be selected
by means of the display and the control buttons. All settings remain stored even if the device is disconnected
from the mains. The device can be operated in stand-alone mode via the control board and the EUROLITE
IR-26 remote control or in DMX-controlled mode via any commercial DMX controller.
Menu structure
Mode
Display
Function
DMX operation
Addr
001-512
Start address
DMX channels
ChMd
14CH
14 channels
2CH
2 channels
Automatic mode
ShNd
Sh1
Show program 1: Derby
Sh2
Show program 2: Strobe
Sh3
Show program 3: Laser
Sh4
Show program 4: Derby + Laser
Sh5
Show program 5: Derby + Strobe
Sh6
Show program 6: Laser + Strobe
Sh7
Show program 7: Derby + Laser
SPEE
0-100
Program running speed slow > fast
Master/slave
SLMD
MASt
Master mode
SLAV
Slave mode
Sound control
SoUn
ON
OFF
Sound control on/off
SoSE
0-100
Microphone sensitivity low > high
Behavior on loss of
DMX signal
NodM
Prom
Master mode
BLAC
Blackout mode
HoLd
Last correct DMX value is held
Display illumination
LED
ON
OFF
Display illumination on/off
Information
Ver
V10
Firmware version
Test program
Test
Test of all effects
Stand-alone mode
Automatic mode
In automatic mode, 7 show programs are available that run at an adjustable speed.
1 Press the
MENU
button so many times until
ShNd
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to select the desired show program. Confirm with the
ENTER
button.
2 Press the
MENU
button so many times until
SPEE
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to adjust the running speed of the program from
1
(slow) to
SP
100
(fast). Confirm with the
ENTER
button.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the
MENU
button so many times until
SoUn
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to select the
on
setting. Confirm with the
ENTER
button.
2 Press the
MENU
button so many times until
SoSE
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to Adjust the microphone sensitivity to the volume of the music (
0
= low,
100
= high).
