Eurogames SRL – Operation and maintenance handbook – BUMPER CAR & MINI BUMPER CAR
30
Adjusting of the body’s supporting rubber blocks
In some points of the frame are present the rubber blocks
E
(Fig.21). These have the aim to avoid the
direct contact between the body and the iron frame.
When closing the body, the body has to lean perfectly on the rubber blocks.
If this does not happen, adjust them as below described:
1. Raise the body.
2. Unscrew the nut
F
of the rubber block to adjust.
3. Screw or unscrew the rubber block to adjust its height.
4. Fasten the nut
F
.
5. Close the body and make sure that it is perfectly leant. If necessary repeat the adjustment operation.
Fig. 21
21. “HYPER BUMPER” DISPLAY CONTRAST SETTING
To set the display contrast, use a small flat-head screwdriver to turn the screw inside hole
A
(fig.
22).Take care not to exert too much pressure on the screw, as you may damage it.
Fig. 22
