Eurogames SRL – Operation and maintenance handbook – BUMPER CAR & MINI BUMPER CAR
22
15. REMOTE CONTROLLER EG09TEL
Functions
This remote control unit allow the remote configuration of products that mount the “EG09 Digital Timer”.
“Wireless Coin”, “Start”, “Stop” or “game End” commands can be sent to all the products or to a single
product. The products can be configured with its own number from 1 to 32.
A standard product is configured as number “1” during production. If control of a single product is
required the “RemoteControl” configuration parameter in the EG09 Digital Timer must be set correctly. In
this case a different number must be set in every available product (for more information please check
the EG09 Digital Timer Configuration Manual).
As an example here you can find a part of the EG09 Digital Timer Configuration manual.
RemoteControl
=01
Device number for remote control functions (1 to 32). If control of a single device is
required this number must be different in any device. If this number is not unique in all
devices there can be communication problems with the remote control unit.
Also when all the products are configured with a different number it still be possible to use the “START”,
“STOP” commands and other functions with the “ALL” destination number. This option control all the
products at the same time.
Keyboard description
[ON/OFF]: I
f this button is kept pressed for about 4 seconds the remote
control display will turn on or off. If pressed again for a short time the
backlight will be turned on or off. The remote control turns off
automatically after about 10 minutes if not used.
[START/STOP]:
These buttons send a Start or Stop command to the
enabled products. They can be used when the remote control is off. In
this case the command will be sent to all the enabled products. If the
remote control unit is ON the command will be sent to the selected
device. The “Device Selected” option on screen can be changed to “ALL”
value or to a specific device number. Note: Start and Stop commands will
be sent on buttons release.
If the
“START”
button is kept pressed for about 4 seconds and released
a “Wireless Coin” is sent to the selected device.
If the
“STOP”
button is kept pressed for about 4 seconds and released
an “End” command is sent to the selected device. The running product
will stop as time end condition. This function may be not available in all
products.
[ALL]:
Selects “ALL” as Device Selected” option. The remote control unit
will be ready to broadcast command to all the available and enabled products.
[+ / -]
: The [+] and [-] buttons have different functions. The menu item can be selected or a specific
configuration parameter value can be changed (for more information please check the EG09 Digital
Timer Configuration Manual).
[SEL]:
This button have the same function of the [ENTER] buttons on EG09 Digital Timer when
programming mode is enabled.
