Eurogames Srl – Operation and maintenance handbook – BUMPER CAR & MINI BUMPER CAR
15
12. EG09 TIMER
Directions for Use
The timer device displays the current remaining game time and the percentage of battery charge. If you
press any of the three selection buttons (-, ENTER, +) it turns on the display light.
To modify any configuration parameter you can press the “+” or “-“
button until you see the parameter in the display. To modify its value
you have to press the “ENTER” button once and then you can use the
“+” or “-“ button. To confirm the new value you can press “ENTER”
button again to return to the list of available configuration parameters.
To enter the “Protected Menu” and modify its configuration parameters
you must be in the first “Main Menu” parameter (“time=000s Bat99%”).
You have to keep pressed “ENTER” button for at least 5 seconds. The
activation of the “Protected Menu” is shown as “< Protect Menu >
message.
To modify the configuration parameters you can use the same
procedure explained for the “Main Menu”. To exit the “Protected
Menu” you have to select the last list item (“ENTER for EXIT”) and press the “ENTER” button.
The modified parameters are immediately saved in the internal memory. It is suggested to remove the
power from the timer device after parameters changes before use it for normal operation again.
If no button is pressed for about 1 minute, the display returns to the first general parameter and exits
from the menu.
Radio Module
If the “RXTX” radio module for the remote control is mounted inside the timer device the
“RemoteSTART” parameter (inside the “Protected Menu”) selects the remote control function. If this
parameter is set to “On” the start of the game depends on the remote control “Start” button. If this
parameter is set to “Off” the game starts on coin insertion and the remote control can be used for
emergency “STOP/START” functions.
RemoteSTART=On
On
The timer device will wait the remote control START
command to start the game.
