EUROCOM LP200ST, Руководство пользователя

Страница: 58 / 113

4 – 3
4
POST
F
AILING THE
POST
Errors can be detected during the POST. There are two categories, “fatal” and “non-fatal”.
F
ATAL
E
RRORS
These stop the boot process and usually indicate there is
something seriously wrong with your system. Take the com-
puter to your dealer or authorized service center as soon as
possible.
; ;
; ; ;
POST Note
• If your model’s SCU
allows it, enable the
Boot Splash logo, to
see an abbreviated ver-
sion of this screen.
• BIOS information
- Important stuff, if your
system needs servicing.
• Memory
- If you don’t want the
system to test this each
time, turn on “Fast Boot”
in the SCU.
•
Shared Memory
- Use the SCU to change
this value.
N
ON
-F
ATAL
E
RRORS
This kind of error still allows you to boot. You will get a mes-
sage identifying the problem (make a note of this message!)
followed by the cue:
Press <F1> to resume, <F2> to enter SCU
Press F1 to see if the boot process can continue. It may work,
without the correct configuration.
Press
F2 to run the SCU (System Configuration Utility) and
try to correct the problem. If you still get an error message
after you change the setting, or if the “cure” seems even
worse, call for help.