![background image](http://html.mh-extra.com/html/sealey/ap24216/ap24216_quick-start-manual_1224483001.webp)
mobile workstation 16 drawer with
ball bearing runners
model no:
aP24216
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. saFetY
warning!
Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this product.
8
do not
open more than one drawer at a time.
8
do not
step on the drawers.
8
do not
let children near the tool chest.
8
do not
use in damp areas.
9
ensure drawers are fully closed and the self locking catch is activated before moving the tool chest.
9
Keep the work area clean and ensure there is adequate lighting.
warning!
The warnings, cautions and referred to in this instruction manual cannot cover all possible conditions and situations that may
occur. It must be understood that common sense and caution are factors that can not be built into this product, but must be applied by the
operator.
2. introduction
Heavy gauge steel with double wall construction for extra strength and durability. Ball bearing drawer runners provide superior performance and
carry heavier loads. Each drawer fitted with catch to prevent unexpected opening, when being transported around the workshop. Added security
provided by side mounted cylinder locks, supplied with two keys. Recessed handles permit units to be slotted in work environments where space
is tight. Rust and solvent resistant powder coat paint finish. Fitted with anti-shock protection on all four corners to prevent accidental damage.
Tough composite top allows these units to be used as a workstation. Comprehensive range of accessories available.
3. sPeciFication
A
P24216| Issue:1 24/06/19
Original Language Version
© Jack Sealey limited
Refer to
instruction
manual
model no.
aP24216
dimensions
(w x d x h)
overall Size
1130 x 565 x 1000
drawers
Qty
medium drawer
6
535 x 400 x 60
large drawer
2
535 x 400 x 130
medium 1/2 drawer
6
270 x 400 x 60
large 1/2 drawer
2
270x 400 x 130
optional accessories
model no.
description
AP24ACC2
Side Shelf with Paper Roll Holder
AP24ACC3
document Holder
AP24ACC4
Waste Bin
AP24ACC5
Can and Bottle Holder
AP24ACC6
drawer divider 3 x 395 x 58mm
AP24ACC7
drawer divider 3 x 395 x 120mm
AP24ACC9
Short Hook Set x 10pcs
AP24ACC10
medium Hook Set x 10pcs