EUROCOM LP200ST, Руководство пользователя

Страница: 85 / 113

5 – 18
D
RIVERS
& U
TILITIES
5
LAN
)
Note:
The system will need some files from the Windows NT 4.0 CD-ROM during the installation
process. Get the CD-ROM ready for use.
1. Click Start , point to Settings , and click Control Panel . Double-click Network (icon).
2. Click Yes when you are asked if you want to install Windows NT Networking.
3. When the
Network Setup Wizard appears, specify how your computer should participate on a
network and click Next .
4. Click Select from list... and Have Disk... to select your Network adapter.
5. In the Insert Disk box type the path: D:\Drivers\LAN\NT40 and click OK .
6. In the Select OEM Option box ( SiS 900 PCI Fast Ethernet Adapter highlighted), click OK .
7. When Windows finds your network adapter “ SiS 900 PCI Fast Ethernet Adapter ”, click Next .
8. Then, select your network protocol(s) and service(s).
9. In the Windows NT Setup box, type the path where the original source of your Windows NT is (e.g.
D:\|386 ) and click Continue .
10. When the SiS 900 PCI Fast Ethernet Adapter Setup box appears, click Continue .
11. Specify if you wish to use DHCP.
12. Click
Next
for Windows to install selected components.
13. Remove the Windows NT 4.0 CD-ROM, insert the Device Drivers & Uti User’s Manual CD-
ROM and then click Retry if Windows indicates it can not locate some files.
14. Then, specify your network bindings.
15. Click
Next for Windows to start the network.
16. Then, follow the on-screen instructions.
17. Shut down and restart
Windows for the new settings to take effect.
LAN Setup (WinNT40)