1.3L Stainless Steel Soup Maker & Blender
6
•
Use the soup maker’s ‘blend/clean’ function to aid the removal of stubborn stains.
Simply assemble the soup maker as previously described and add 1300ml warm water with a small amount
of mild detergent. Fit the lid and press the ‘blend/clean’ button continuously until any stains have been
removed. Do not use the blending mode for more than 20 seconds at a time.
Troubleshooting
Problem
Solution
The unit is not working and is
bleeping.
The soup maker has been over-filled. Remove
liquid until it falls below the maximum level.
Ingredient pieces are still too
large after the smooth cycle is
complete.
Pieces may have been too large initially – use the
‘blend / clean’ function after the cooking
programme.
The ingredients are not cooked
properly at the end of the cycle.
Chop the ingredients into smaller pieces before
adding to the soup maker.
The ‘blend/clean’ mode is not
working after 20 seconds of
blending.
The programme will automatically stop the blend
function after 20 seconds of continuous operation.
Wait for a few minutes and try again.
NOTE
: Always allow the unit to cool sufficiently
after each blend operation.
Specifications
Material
Stainless steel body
Capacity
1.1L (min) - 1.3L (max)
Heating / motor power
800W / 250W
Voltage
220-240VAC 50Hz
Speed
11,000-22,000 rpm
Certification
CE and RoHs
