Euroalpi Monviso, Руководство по эксплуатации и обслуживанию

Страница: 4 / 50

-
Every initiative or operation not considered in this manual must be considered dangerous. In this
case the ZF company does not assume any responsibility both civil and criminal.
-
Do not clean the interior and exterior parts of the stove with water.
-
Do not expose plants, animals, things and people to the hot air of the stove for too long.
-
Install the stove in locations suitable for the prevention of fire and already prearranged for safety.
-
The storage of the stove and the covering of all its parts (even those in ceramic) must take place in
rooms without humidity and far from bad weather.
-
Do not set the body of the stove directly on wood or flammable floors, in these cases always put an
insulating material between the stove and the floor.
-
The pellet stove is not an apparatus for cooking or heating up foods and drinks.
-
Carry out all operations in maximum safety.
-
Do not place any object on the stove.
-
Do not dry any cloth, object, or being (animals, plants, etc.) on the stove.
4 Regulations and declaration of conformity
The ZF company states that the stove complies with the following directives and regulations for the CE
marking European Directive:
2014/30/UE (EMCD Directive) and following amendments.
2014/35/UE (Directive on the safety of electrical equipment LVD) and following amendments.
2011/65/UE RoHS
European Standards: EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3; EN 60335-1;
EN 60335-2-102; EN 62233; EN 50581; EN 14785.
For the installation and the use of the stove all the local and national and all European standards must be
met.
5 Warranty
Warranty conditions
ZF s.r.l. located in Dino Fochesato Street n.1 Meledo of Sarego (VI) guarantees its products for 2 years from
the date of purchase, for manufacturing or material defects. This warranty falls if the flaw of conformity is
not reported within 2 months from the date of its detection.
ZF s.r.l. limits its responsibility to the supply of the stove, which has to be installed in accordance with the
state-of-the-art, following the instructions contained in the manual supplied with the product and in
accordance with the laws in force. The installation must be carried out by qualified staff and under the
responsibility of the person who designates him, who will assume responsibility for the final installation and
the consequent good operation of the installed product. ZF s.r.l. declines any responsibility in case of non-
observance of these precautions. The installer will have to release a Declaration of conformity of the
installation in accordance with the state-of-the-art, in accordance with the laws in force.
Examples of installation technicians:
-
Authorized Service Centers technicians
-
Technicians and companies associated Anfus (National Association Stove Fitting) (Italy)
-
Technicians adherent to national school training plans Fuspa (Italy)
-
Your trusted technicians (qualified thermotechnics)