Euroalpi Monviso, Руководство по эксплуатации и обслуживанию

Страница: 46 / 50

The duct system allows to carry and distribute the heat generated from the stove also in other rooms
different from the one where the stove is positioned.
Connection
The connection to the stove can be of two types:
-
Connection on top of the stove only through a tube
-
Connection on the back of the stove using two pipes
The company Z.F. s.r.l. recommends using smooth tubes, with wide curves and insulated to prevent
heat loss along the way, it also recommends not to exceed 10 meters in overall length of the system
because also in this case there’s loss of heat produced from the stove.
Regulation
The adjustment of the channeling can happen in two ways depending on the type of stove you have:
-
Manual Adjustment
-
Automatic Adjustment
Manual Adjustment
In this case the adjustment of the air flow in the duct is performed manually by a lever placed in the
rear of the stove in the upper right (see figures below)
To open simply push the lever
To close lift and pull the lever towards you
16 Duct (Optional)