Attention:
Discon
nect the machine from the electricity supply by removing the plug
from the mains socket. When cleaning the machine, it must always be
disconnected from the electricity supply.
Turn the handwheel until the needle is fully raised. Open the hinged front
cover and unscrew the needle plate screws with the screw drived (1).
Use the brush supplied to clean the whole area (2).
Remove the bobbin case. Snap the two hook retaining arms (3) outwards.
Remove the hook race cover (4) and the hook (5) and clean with a soft
cloth. Lubricate at the point (6) (1-2 drops) with sewing machine oil. Turn
the handwheel until the hook race (7) is in the left position. Replace the
hook (5). Replace the hook race cover and snap back the two hook
retaining arms. Insert the bobbin case and bobbin and replace the stitch
plate.
Fabric fluff and threads must be removed regularly. Your machine should
be serviced at regular intervals at one of our service agencies.
Remove the needle plate:
Cleaning the feed dogs:
Cleaning and lubricating the hook:
Important:
31
Maintenance
2
3
7
6
4
5
1
All manuals and user guides at all-guides.com
