EURO AJPI PASUBIO Скачать руководство пользователя страница 3

Страница: 3 / 45

Igniting the stove in case of any component failure.

Exposing oneself for a long time directly to the hot air of the stove.

Exposing animals, plants and any inflammables to the air of the stove.

Placing any kind of object on the stove.

Placing any washing or object on the stove to dry.

Infringing the parameters of the stove.

Installing the stove in not specific conditions and environments.

Using the appliance as an incinerator and fuels other than those recommended.

Using a quality of pellet that doesn’t meet the regulations

DIN 51731

Not executing the maintenance operations provided for.

Staying within 2 meters from the stove in case of misfire for the first 10 minutes.

Making the stove work with the door open.

Touching the stove when barehanded.

Safety

The installation of the stove, the flue, electrical connections, checking its operation, should
always be carried out by authorized and qualified personnel.

Install the stove in accordance with the regulations of the local area, region or state.

For the proper use of the stove and electronic parts, you must follow the instructions in the
user's manual.

The stove must be fed exclusively on pellets with a diameter of 6 mm DIN 51731.

Incorrect installation or poor maintenance (not conforming to the provisions in this booklet,
"Use and Maintenance") can cause damage to people and property. In this case the company
ZF is released from any civil or criminal liability.

Before performing any operation, the user must have read and understood all the contents of
this manual "Use and Maintenance".

Tampering and misuse of the stove can be dangerous for the user’s safety. In these cases, the
ZF Company disclaims any civil or criminal liability, resulting from damage to people and
property.

When the stove is in operation, most of the surface is very hot (glass, handles, tubes and
shells); must then use the appropriate protections for the contact.

It is forbidden to operate the stove with broken glass, the open door or any defective part
(fans, motors, etc..).

Before carrying out any cleaning or maintenance, disconnect the stove from the power
supply with the power switch; after that, remove the cable on the back of the same, check the
cooling of the entire internal and external structure, and the ash in the combustion room.

In case of fire in the flue: switch off the stove, disconnect the power supply from the mains
and never open the door of the stove. Call the authorities (fire brigade).

The stove must be electrically powered by a system with grounding conductor, as provided
by law 73/23 and 93/68 EEC.

Warnings

Turn the stove off in case of failure or malfunctioning.

Never feed pellets manually into the brazier.

Make sure the brazier is empty before igniting the stove (even in case of previous misfire).

Every initiative or operation not provided for in this manual must be considered dangerous.
In this case the ZF company does not assume any responsibility both civil and criminal.

Do not clean the interior and exterior parts of the stove with water.