Euresys EureCard Grablink Series, Руководство пользователя

Страница: 56 / 74

GRABLINK series Installation Instructions
56
Auxiliary board installation
Grablink Expert 2 comes with an auxiliary board that includes an additional card bracket. It
provides highly convenient means for system connection not directly related to camera. Installing
this board is optional.
The auxiliary board needs no hardware setup adjustment (switch or jumper).
The auxiliary board must be installed in a free PC bracket location, as depicted in the drawing,
taking into account the length of the provided interconnecting ribbon cable.
Note. Install the bracket after installing Grablink Expert 2, with the same precautions.
Auxiliary board recommended installation procedure:
1. Choose an available location and remove the associated blank bracket. To achieve
this, remove the securing screw and keep it aside for later use in the procedure. Keep
the blank bracket in a known place for possible re-use.
2. Place the auxiliary board in the targeted location. Ensure that the lower part of the
bracket is inserting into the corresponding enclosure fastening.
3. Secure the auxiliary board with the saved screw.
4. Fasten the interconnecting ribbon cable on both sides. If necessary, bend this cable.