Euresys EureCard Grablink Series, Руководство пользователя

Страница: 42 / 74

GRABLINK Value cPCI Description
42
Bracket layout
The bracket attached to Grablink Value cPCI
provides two connectors.
The upper connector is for system connection,
such as external trigger, illumination control or
motion encoder. It is a sub-D 9-pin female
connector.
This connector is called
SYSTEM .
A red/green pair of LEDs called Status LEDs
shows the global status of the frame grabber.
When the green LED is lighting (ON), MultiCam
is correctly started. If the red LED is lighting
(ON), that is a board-wide error has appeared.
A second red/green pair of LEDs called LEDs
for CAMERA gives information about each
camera acquisition. The green LED is lighting
(ON) during expose and readout phases of a
sequence. If the red LED is lighting (ON), that
is a channel acquisition error has appeared
during the sequence.
The lower connector is for camera connection.
It is a blade contact high-density 26-pin female
connector. It complies with the Camera Link
standard. Grablink Value cPCI fully supports
the Base configuration as per the standard.
This connector is called
CAMERA .
In depth information is available in the
electronic documentation coming with Euresys
products. Grablink manuals are parts of
Euresys MultiCam documentation.