Euresys EureCard Grablink Series, Руководство пользователя

Страница: 34 / 74

GRABLINK Expert 2 Description
34
Bracket layout
The interconnection structure of Grablink
Expert 2 uses two brackets.
The bracket attached to Grablink Expert 2
provides two connectors.
They are both for camera connection. They are
blade contact high-density 26-pin female
connectors. They comply with the Camera Link
standard.
The upper connector is called
CAMERA t B , while
the lower one is called CAMERA t A .
Grablink Expert 2 fully supports the Base and
Medium configurations as per the standard.
Refer to the following table:
Connector
Base
configuration
Medium
configuration
Camera A
Used by first
camera
Primary
Camera B
Used by
second
camera
Used
by
single
camera Secondary
Additional interconnection means are provided
on a separate card bracket. It is attached to an
auxiliary board linked to Grablink Expert 2 by a
26-wire ribbon cable.
The auxiliary bracket provides two connectors.
The upper connector is for general purpose
Input/Output connection. It is a sub-D 25-pin
female connector.
It is called
I/O .
The lower connector is for system connection,
such as external trigger, illumination control or
motion encoder. It is a sub-D 9-pin female
connector.
This connector is called
SYSTEM .
In depth information is available in the electronic
documentation coming with Euresys products.
Grablink manuals are parts of Euresys MultiCam
documentation.