9
Batch configure the IP address of the network camera
The Admin Tool management tools can use the same IP address each camera factory before being installed
in bulk configuration of multiple network cameras IP address.
These network cameras are connected to the same switch with the machine, through the Admin Tool quick
search network of devices, the mouse marquee multiple camera equipment, click the “batch Configuration”
button, the batch IP address configuration window pop-up. The user can set the starting IP address and ending
IP address and other content, bulk assign IP addresses to these network cameras, specify the subnet mask,
default gateway, port and center IP information. Meanwhile, we can use the tool to open the status indicator to
confirm which network camera is being tested, easy for putting on a label after testing.
Fig. 10.
4. Access to the device
4.1. Access using WEB Browsers
4.1.1. Logon
Fill in the IP address of the network camera into the URL of your WEB browser. The default IP is 192.168.1.4.
The logon dialog box is shown as below.
Fig. 11.
Username: The default username of the network camera is system.
Password: The default password of the network camera is system.
Port: The data port of the network camera is default to be 6002.
