6
Step 4 - Connect speed dome camera and wall bracket.
Put speed dome camera connection port into the bracket hole and screw 4pcs hexagon screws into the corre-
sponding screw holes.
Fig. 4. Step 5
Step 5 - Fix the speed dome camera
Lead the cable out from the wiring port, then fix it on the wall by using 4 screws. Seal the wiring port of the brac
-
ket by using silicon sealant.
Step 6 - Cable connection
Please refer to section of six of this chapter- Connection method.
Step 7- Tear off protection film
Tear off protection film of transparent cover
Note:
Please take care of the transparent cover.
3. Device configuration
3.1. Connection device
Connection method as below program, order to connect network cable, power supply cable(connect order based
on the keyboard model number, here just give one example). Details as below:
Fig. 5.
