ETS REJUVASUN 332, Руководство пользователя

Страница: 9 / 36

28940-01A
4
Installation - Assembly Procedures
Assembly Procedures
This sunbed arrives with a ballast tray stop
bar installed to limit tray movement (see
right). To remove, lift the bar, shift it to the
left or right and then pull it from the bed.
After the bed is assembled, reinstall the
bar to keep the tray from damaging the
access panel if the bed is moved.
Stand Assembly
1. Place the bench unit approximately
where it will be when assembled.
Leave some room behind it to work.
2. Slide the ballast drawer under the
bench, as shown, with the cables
toward the back.